Thanks to feedback from other people who printed the original release, changes have been rolled out, mainly by increasing the perimeter. This should help with other slicers and printers where “thin wall detection” can not be enabled or wouldn’t act as intended. I never noticed this as an issue because my slicing program (slic3r for […]
For ages, region specific imports have been in existence; however, I’ve never bothered with obtaining them because of the language barrier. Thanks to the super stacker that’s no longer an issue. Problem solved, right? Nope, this brings up another issue — dealing with the cartridge slot. The cartridge slot for the Super Famicom and the Super […]
Last month, I purchased an INLretro Dumper-Programmer and began using it almost immediately. However, without a case, the solder points on the bottom of the PCB left marks on my desk (which my wife still hasn’t found out about). Having a 3d printer and CAD knowledge, I designed a basic case for the device. The […]
Greg Collins aka Collingall has just launched a webstore where he’ll be selling all of his 3D printed designs! While most of Greg’s designs are open-source, the fact is that many of us don’t have 3D printers and would just like to purchase his amazing work. Now you can support his development directly and hopefully […]
There’s now a 3D printed case available for the MiSTer FPGA kit. It can be ordered in different color configurations and has models for both the full kit + IO board, as well as the HDMI-only version with a fan. Sadly, the glow-in-the-dark option isn’t available on only the IO ports, would might be a […]
I recently picked up a Virtual Boy and couldn’t resist the urge to make a display for the only game I currently have Virtual Boy Wario Land It is a super simple design that prints fairly quickly! Files are available in the (still in progress) 3D print section of the website here: http://retrorgb.com/virtual-boy-3d-print-cartridge-stands.html
Greg Collins is at it once again, this time bringing us a 3D printed case for the RetroTINK2x scaler! For DIY’s, the case files can be downloaded from the (still in progress) 3D print section of the website (screws & filament needed are listed below): http://retrorgb.com/retrotink2x-3d-printed-case.html Alternatively, Castlemania Games will be selling them pre-printed, as well […]
Someone recently uploaded a 3D print design for a dual-controller Atari 5200 adapter. This is to link two controllers together for dual-stick games like Robotron and Space Dungeon. I believe I’ve seen this mod before, but I saw someone on AtariAge printed one and liked it, so I thought I’d write up a quick post about […]
Greg Collins has just made prints of his free 3D design available for purchase through his eBay store: https://ebay.to/2CfJtT2 More information and the files to print your own version can be found here: http://retrorgb.com/ultrahdmi-nocutmod.html Since I have been asked a few times for a listing, you can purchase the #UltraHDMI #NoCutMod directly from me, I was going […]
A thingiverse user has just uploaded a free 3D print design for a map of the original Legend Of Zelda. This seems like the exact type of thing I’d love to play with if I owned a 3D printer! If you make one, post a detailed pic of how it looks!: https://www.thingiverse.com/thing:2138498
