A prototype of the HD remake of my favorite fighting game of all time was just posted for download! I’m not sure if this was the same HD fan remake discussed a few years ago before it was shut down by the owners of MK’s rights, but either way, it’s exciting to see…especially with all the […]
Frank_fjs, creator of the Sentinel supergun, just designed a board that works jointly with the Digital AV Interface announced/designed a while back by Markus Hiienkari of OSSC fame. The Helper PCB mainly provides 2 Neo-Geo controller ports and power connectivity, basically eliminating the need for a supergun for a comprehensive CPS2 setup. Here are the […]
FirebrandX has just added stock of his Genesis Model 1 audio amplifier boards, called the M1 Mini Mega. This board is an easy way to get really high quality stereo audio from a M1 Genesis, that’s a noticeable improvement over using the headphone jack/amp. Ordering Page: http://www.firebrandx.com/m1minimegakit.html Installation Instructions: http://www.firebrandx.com/m1minimega-installguide.html Some features: Designed to work on all […]
Krikzz has just launched a sale on his Joyzz controllers when purchased directly from Krikzz.com! I’ve personally tested this controller and have been enjoying it’s wireless convenience! At about $44, it’s certainly worth considering: https://krikzz.com/store/home/52-joyzz.html During next week we offer 33% discount on #Joyzz wireless controller at https://t.co/eIkI80XsCQ pic.twitter.com/XcKGB4ieTm — Igor Golubovskiy (@krikzz) January 6, […]
Pseudo Saturn is a community firmware that can be flashed to devices like the Action Replay 4. It was originally designed to simply add a hardware exploit option to the AR4, allowing the booting of burned discs and negating the need for a modchip. But features have been continually added to it through the years […]
I recently picked up a Virtual Boy and couldn’t resist the urge to make a display for the only game I currently have Virtual Boy Wario Land It is a super simple design that prints fairly quickly! Files are available in the (still in progress) 3D print section of the website here: http://retrorgb.com/virtual-boy-3d-print-cartridge-stands.html
The Swiss team has been hard at work adding an even longer list of features to the already amazing software! While there are a lot of notable changes in these last revisions, the one that really stands out to me is the ability to disable dithering for blending operations, which amplified a lot of noise […]
Greg Collins is at it once again, this time bringing us a 3D printed case for the RetroTINK2x scaler! For DIY’s, the case files can be downloaded from the (still in progress) 3D print section of the website (screws & filament needed are listed below): http://retrorgb.com/retrotink2x-3d-printed-case.html Purchase all RetroTINK Products via multiple vendors worldwide here: https://www.retrorgb.com/retrotink.html […]
Keith Elliott, just designed an SD Card Holder that sits right on top of the PSIO SD Slot and adds room for 4 more SD cards. Keith uploaded the design files on thingverse and made 2 versions available: one with an opening for the led indicator and one without it. He’s also working on incorporating […]
Here’s a full review of the DCHDMI! The video also goes into detail about all solutions for DC on a flat-screen, as well as describes some of the issues with the DC’s signal. For more information and the most up-to-date links, please check out the main Dreamcast page: https://www.retrorgb.com/dreamcast.html DCHDMI used in tournament: https://kotaku.com/an-old-school-marvel-vs-capcom-2-throwdown-was-the-bes-1831415905
